How To Make Your Mattress Higher

S To Install A Bed Wedge

Step 1: First, pull out the mattress from the bed frame

Step 2: Get someone to help you raise the upper parts of the bed frame

Step 3: Next, slide the wedges under the bed frame until it is on the same line with both bedposts

Step 4: Make sure the wedges are tight before placing the mattress back on the bed frame.

What Is A Bed Frame

The terms bed frame and mattress foundation are often used interchangeably, but there is a difference.

A bed frame is a decorative portion surrounding the mattressthis includes a headboard, footboard, and side panels . Typically, the bed frame will be attached to a foundation that the mattress can rest on.

For example, many wooden frames have a slatted foundation that consists of wood planks attached to the two side panels of the frame. A metal frame often has thin metal rods instead of traditional wide slats.

However, some bed frames only provide a rim around the perimeter of the mattressleaving no base for you to place the mattress on.

Check And Replace Worn

Sometimes, the culprit is damaged layers. This might be a bit more complicated, as not all manufacturers make their products with easily swapped-out layers or removable covers, but some brands may offer these types of services.

Check to see if your layers are worn out and if they can be replaced. If so, this just might give you the extra firmness needed to make your sleeping surface more suitable for resting on.

Also Check: Where To Buy Silk Pillow Cases

Adds Height To Your Bed

Allowing your mattress to rest on the ground is never a good idea. When sleeping on the floor, we are more open to cold air, dust, dirt, and humidity. It is also challenging to get out of bed when your bed is resting on the ground.

A mattress foundation can add anywhere from 16 to 23 inches of heightmany also come with the ability to adjust the height to your preference. However, it is best not to raise your bed too high, either.

The ADA recommends beds between 20 to 23 inches high from the floor to the top of the mattressthis will make it easier to climb into bed each night and also allow you to safely get out of bed in the morning.

Open The Box Within 72 Hours

Once your mattress in a box arrives at your doorstep, itâs out of its element, and subject to a new climate and atmosphere. Because of this, we strongly encourage you to open it within 72 hours of receipt. Leaving it cooped up much longer than that could result in extended recovery time, not to mention, more time spent in the box means less time for you to try out your new mattressrisk free for 100 nights. So do yourself and your new investment a favor, and break into that box as soon as youâre able.

Don’t Miss: What Is A Therapedic Mattress

Why Are Japanese Beds So Low

Long cultural tradition is the main reason why the Japanese sleep on a thick futon mattress laid over a tatami mat and rush grass. They believe it is better for your back, but the tradition probably evolved for practical reasons since Japanese homes are small, and the region sits on four tectonic plates, making earthquakes common. Having a low-profile bed reduces the chance of damage from a strong quake.

Who Needs A Firmer Mattress

People who need a firmer mattress are usually stomach sleepers, back sleepers, and heavier people. The robust support that typically comes with firmer beds can help these people by keeping them more lifted as they lie down. Hot sleepers can also benefit from firmer beds so theyre not as stuck in the layers, which could cause them to absorb additional heat.

Don’t Miss: Lumbar Support Pillow For Office Chair

What Is A Mattress Cover

What is a mattress cover?

Unlike the mattress pad, the mattress is cover is thin and very light. It does not give too much weight.

Do you want to know more? Keep reading to be enlightened.

People sure do know what cover means. It acts like a coating or a barrier to a particular thing.

When policemen say cover, it means to protect themselves from enemies.

Are you getting a hint about a mattress cover now? If yes, thats good, and if not, thats fine.

Ill explain it to you further.

People usually use mattress covers to cover the mattress. But that goes down to a lot of uses and work for the mattress cover.

Many often use it to protect the mattress from pests coming in that could ruin the material used and in hotels to limit the transfer of odour from one guest to another.

Indeed mattress cover has a lot of purposes.

It also depends on the material to make it one can make it of plastic more useful.

When a guest, friend, or family member vomits into your mattress, youll have a hard time cleaning it. But then plastic mattress covers would save you from it.

It would avoid all dirt, including spilled liquids to enter the mattress that is a must-have in your house.

A mattress cover can also be your turning point in having a good-looking bed. Once your mattress is old, it gets dirty looking, and signs of usage show up.

One way to hide those flaws found on your mattress is to add luxury-looking mattress covers to make it look elegant and new.

Make Sure Your Mattress Is Properly Supported

Its important to make sure your mattress has the correct amount of support, even though you dont always need to buy the matching box spring or foundation with a new mattress. This aids in maintaining materials and delaying wear.

You can get advice on how to take care of your product by consulting the manufacturer or the warranty. While spring mattresses are the only ones that should ever be on a box spring, memory foam and other speciality mattresses should always have a strong foundation.

Queen and king sizes require additional support in the center of the bed in addition to the frames ability to hold the weight of the mattress and its occupants. Depending on the type and weight of the mattress, a platform bed with wide slats may require additional slats for stability.

Every year or so, you should inspect the slats and springs supporting your bed to make sure there are no breaks that could compromise the integrity of your mattress.

Recommended Reading: How To Clean Urine From Mattress Hydrogen Peroxide

The Right Way Egg Crate Mattress Pad How To Use

Do you know whats an egg crate mattress pad how to use it? Laying down on a mattress makes us feel comfortable, indeed.

But we can always add something to that, like a topper, so how do we use an egg crate mattress pad?

There are so many egg crate foam UK mattresses that you can find in stores, online shops, and even furniture shops.

But then have you already found the right one for you?

When you are buying a good quality mattress, you are also buying something pricy.

Of course, that is given. But then you can always look for affordable ones.

In an instance that you would want to add something to make a simple mattress feel luxurious and more comfortable, go for egg crate mattress topper UK-manufactured on top of it.

These famous egg crate mattress pads are one good topper.

But people get confused about how you should use it. Isnt it upside down?

Egg crate mattress is famous for the surface it has on one side.

It indeed looks and feels like an egg crate, which is why it has so much comfort.

You want to follow these steps to put the pad on the top of your bed successfully.

One and for most, this is your choice, so it is always up to you if you would want to follow these or not.

Develop An Inclination To Your Sleeping

Unfortunately, a terrible mattress is just one of the numerous individual factors that can cause people to dislike sleeping. Some people are so busy with their hectic schedules of work, school, and extracurricular activities that they neglect to get enough rest. A new mattress could help you go back to sleeping like you used to.

If youre not feeling refreshed in the morning, your mattress could be to blame. Creating a relaxing bedroom setting can also help you get more shut-eye.

Sleep well and rejuvenate your body and mind. Here are some suggestions for making your bedroom more conducive to sleep:

• Make sure your bed is only used for sleeping or sensual moments.
• Keep the environment as quiet and undisrupted as possible.
• Make sure the temperature in the room is at 65 degrees Fahrenheit .
• Keep all electronics away from reach
• Dont let your kids play with any electrical devices.

You May Like: What Type Of Mattress Is Best For Arthritis

When Do You Need To Raise Your Bed

You might want to raise bed height for several reasons. Some people have problems getting in and out of bed while some do it for aesthetic reasons. Increasing your bed height will make it easier to get in and out, especially if you have joint pain.

If you live in a small apartment, getting some extra storage space under your bed would not be such a bad idea. In that case, raising your bed frame height would be the smart thing to do.

Does Bed Height Affect Sleep

Overall, the height of the bed will not affect the quality of someone’s sleep. That being said, the thickness of the mattress will determine the amount of comfort or support someone receives. For instance, thicker mattresses are usually more supportive than thinner mattresses and, if they have a thicker comfort layer, they will also be more comfortable.

You May Like: What Mattress Is Best For Shoulder Pain

How To Make Your Bed Higher

It doesnt matter if youve bought a new bed or have moved somewhere your bed height needs to be correct. You might ask, why is that? If your bed doesnt have the right height, getting in or out of the bed can become a problem. In such cases, you should know how to make your bed higher.

From DIY-ing to hiring help, there are various ways through which you can increase bed height. Read on to find out the ideal bed height and some ways to adjust bed height if needed.

How Far Apart Should Bed Slats Be

Bed slats too far apart will not support the mattress correctlythis is especially true with memory foam or latex mattresses since these beds can sag between wide gaps.

Typically, it is best to keep slats no more than 2.75 inches apart. This distance will provide adequate support and keep air circulating through the bed.

Don’t Miss: Is Nectar Mattress A Scam

How To Make Your Soft Mattress More Firm

If your new mattress lacks the support you need, try these tips before buying another one.

Mercey Livingston

CNET Contributor

Mercey Livingston is a health and wellness writer and certified Integrative Nutrition Health Coach. She’s written about fitness and wellness for Well+Good, Women’s Health, Business Insider, and Prevention.com among others. When not writing, she enjoys reading and trying out workout classes all over New York City.

Do you feel like you can relate to Goldilocks when it comes to finding the right mattress? You don’t want one that’s too firm, and a mattress that’s too soft can be just as uncomfortable. Unless you’re a strict side sleeper, mattresses that are too soft can misalign the spine and promote lower back pain, which is a recipe for sleep disaster.

If you’ve found yourself with a new mattress that’s too soft, or an old mattress that’s softened up over time, there are several things you can do to tailor your mattress to fit your needs. Keep reading for ideas you can try to make your soft mattress firmer and more supportive.

A latex mattress topper can help your soft bed feel more supportive.

You may be familiar with plush mattress toppers that make your bed feel even softer, but there are plenty of mattress toppers that can do just the opposite. When it comes to choosing a topper that will make your bed firmer, you can generally find options made of memory foam, latex or polyurethane.

Keeps Your Mattress In Place

If your mattress rests on the ground, it is likely to slide around as you sleep. Additionally, if its on the wrong foundation, it may slipcausing it to sink in the areas where it is not supported.

A good foundation will keep your mattress stable and firmly in placepreserving its lifespan and preventing the discomfort from a mattress sliding around.

Also Check: What Is The Best Mattress Topper For Hip Pain

How To Raise A Platform Bed

Platform beds are popular because of their versatility and convenience. The main difference between a panel bed vs platform bed is that platform beds come with a built-in mattress foundation, meaning theres no need for accessories that provide additional support. But the absence of something like a box spring means that many platform beds are low off the ground, which may not be your preferred style.

If you currently own a platform bed or youre considering purchasing one, youre not stuck with this height.

Here are some simple and creative solutions for how to raise a platform bed.

Convert Your Bed Frame To A Platform

While you are in the DIY spirit, you can also change your bed frame from a conventional bed frame with legs to a platform bed. This is similar to the option above, but here you will be creating a platform bed from your current bed frame. Platform beds are great choices if you are someone who wants a low bed frame.

Platform beds allow you to get rid of your box spring altogether, which will save you several inches in total bed height. Most conventional bed frames require the use of a box spring, alternatively, you can use a low-profile box, a bunkie board, or with a little DIY magic you can turn your current bed frame into a platform bed frame.

Materials you will need for this project include:

• Pine boards: Use 1 x 4 pine boards. The number of pine boards you need depends on your bed frames width.
• Wood-cutting saw

To convert a regular metal bed frame to a platform bed, all you really need are appropriately-sized slats to take the place of your old box spring. These 1 x 4 pine boards will be your new slats.

Place the pine boards on the bed frame to act as slats, and reassemble your bed without the box spring. You can dispose of your box spring how you see fit. All you will need now is your mattress and your newly-slatted bed frame. Standard box springs are about nine inches tall, so this method can lower your bed by a whopping nine inches.

Recommended Reading: What Is Eastern King Mattress

Why Mattress Firmness Level Is Crucial For Sleep

Getting the best mattress for yourself is all about finding the right firmness level suitable for your sleeping position and body type. Side sleepers need a medium, medium-soft, or soft mattress to cushion their shoulders and hips. In the side sleeping position, these regions bear the weight of your body, so adequate cushioning will eliminate pressure points in the shoulders and hips.

Back sleepers need a medium or medium-firm mattress to keep their spine in a neutral position. A firmer surface prevents mattress sinkage beneath your back, eliminating chances of spinal misalignment. Spinal misalignment triggers back pain, neck ache, and muscle stiffness.

Stomach sleepers need a firm mattress for enhanced support beneath their abdomen. This reduces the chances of straining your spine and waking up sore.

Combination sleepers feel good on a medium mattress because it suits their changing sleep positions through the night.

Softer mattresses are more pressure-sensitive than firmer beds, so petite sleepers need soft beds to conform to them. These soft beds compress under weight, making them feel softer for those who weigh more than 130 pounds. Average and plus size sleepers tend to feel the mattress sink beneath them, triggering spinal misalignment. To counter this sinking feeling, plus-size sleepers need firmer beds, while average sleepers need a medium.

Is The Mattress Pad And Mattress Cover The Same

While reading the question, you might get to think that it isnt since it was two different names on it, right?

I will give you more things to avoid confusion and to clarify it out.

A lot of people make things complicated that they believe one piece of information is right.

A mattress pad is like a mattress, and it has some thickness on it containing some foam.

Or when you say mattress pad, it must be a topper for a bed to add in comfort.

People often use it to add bulk and thickness to ones mattress, feeling uncomfortable or no longer suitable for sleeping.

Mattress pads ensure that you will have a good sleeping surface. It stands as a temporary solution for a mattress that is losing its support.

It is not necessary to add a mattress pad to your mattress. And that is one of the things they differ on. A mattress cover is a must on your bed.

Your mattress wont be complete if there is no mattress cover on it. The mattress cover would serve as protection for the whole bed.

If you wish for a long-living mattress and something that could grow old with you, you have to make sure it is protected.

Dirt, fluids, and even the odour that create contact with the mattress can damage it slowly.

One thing that you can do is to avoid such by adding a cover to it.

It is up to you if you would like to purchase one.

You have to consider the purpose of it and the material of it. Bed covers are usually thinner than mattress pads.

Thats the truth behind everybodys confusion.

Don’t Miss: Why Is There Fiberglass In Mattresses